00131951_0
Stellantrieb LM24A-F


00131951_0

SERVOMOTEURS MIN/MAX

FOR CONSTANT VOLUME FLOWS WITH VMIN/VMAX SWITCHING IN AIR CONDITIONING SYSTEMS

Actuators for mechanical self-powered CAV controllers Type EN, RN, or VFC, and for flow adjustment dampers Type VFR

  • Switching between two volume flow setpoint values, e.g. for daytime and night-time operation
  • Supply voltage 24 V AC/DC or 230 V AC
  • Control input signal: 1-wire control or 2-wire control (3-point)
  • Potentiometer or mechanical stops
  • Positive lock connection with CAV controller
  • Retrofit possible

Application

Application

  • Actuators for min/max switching
  • Switching between volume flow setpoint values of mechanical self-powered CAV controllers Type RN, EN or VFC
  • Change of the damper blade positions of flow adjustment dampers Type VFR

Description

Parts and characteristics

  • Potentiometer or mechanical stops for setting the volume flow rate setpoints
  • Supply voltage 24 V AC/DC or 230 V AC
  • Overload protection
  • 1-wire control or 2-wire control (3-point)
  • Optional auxiliary switch for capturing the end positions

Technical information

Function, Technical data

  • Function
  • TECHNICAL DATA

Functional description

The actuator moves a damper blade or a damper blade mechanism to the minimum or maximum position.

Minimum and maximum positions can be set on potentiometers or using mechanical stops.

1-wire control or 2-wire control (3-point) can be used.

1-wire control is actually an open/close control or min/max control.

Control options and effect of actuator action in case of factory setting

Order code detail Function Control Direction of rotation
Order code detail Function Control 1 2

B50, B52

Min/Max

1-wire control, 2-wire control

Vmin

Vmax

B60, B62

Min/Max

1-wire control, 2-wire control

Vmin

Vmax

E01

Min/Max

1-wire control, 2-wire control

Vmin

Vmax

E02

Min/Max

1-wire control, 2-wire control

Vmin

Vmax

M01

Min/Max

1-wire control, 2-wire control

Vmax

Vmin

M02

Min/Max

1-wire control, 2-wire control

Vmax

Vmin


Actuators LM24A and LM24A-F

Supply voltage (AC)

24 V AC ± 20 %, 50/60 Hz

Supply voltage (DC)

24 V DC ± 20 %

Power consumption – load

1 W

Power consumption – idle

0.2 W

Power rating

1.5 VA

Torque

5 Nm

Running time for 90°

150 s

Control input signal

1-wire control or 2-wire control (3-point)

Connecting cable

3 × 0.75 mm², 1 m long

IEC protection class

III (protective extra-low voltage)

Protection level

IP 54

EC conformity

EMC to 2014/30/EU, RoHS to 2011/65/EU

Operating temperature

–30 to 50 °C

Weight

0.5 kg


Actuator LM230A and LM230A-F

Supply voltage

100 – 240 V AC –15 % +10 %, 50/60 Hz

Power consumption – load

1.5 W

Power consumption – idle

0.5 W

Power rating

3.5 VA

Torque

5 Nm

Running time for 90°

150 s

Control input signal

1-wire control or 2-wire control (3-point)

Connecting cable

3 × 0.75 mm², 1 m long

IEC protection class

II (protective insulation)

Protection level

IP 54

EC conformity

EMC to 2014/30/EU, low voltage to 2014/35/EU, RoHS to 2011/65/EU

Operating temperature

–30 to 50 °C

Weight

0.5 kg


Auxiliary switch S2A

Type of contact

2 changeover contacts1)

Max. switching voltage (AC)

250 V AC

Max. switching current (AC)

3 A (resistive load); 0.5 A (inductive load)

Max. switching voltage (DC)

110 V DC

Max. switching current (DC)

0.5 A (resistive load); 0.2 A (inductive load)

Connecting cable

6 × 0.75 mm², 1 m long

IEC protection class

II (protective insulation)

Protection level

IP 54

EC conformity

EMC to 2014/30/EU, low voltage to 2014/35/EU, RoHS to 2011/65/EU

Operating temperature

–30 to 50 °C

Weight

0.250 kg

1) If both auxiliary switches are used the switching voltages must be the same


Actuator 224-24-03-001

Supply voltage (AC)

24 V AC ± 20 %, 50/60 Hz

Supply voltage (DC)

24 V DC ± 20 %

Power rating (AC)

4.5 VA

Power rating (DC)

3 W

Torque

2.5 Nm

Running time for 90°

20 – 60 s

Control input signal

1-wire control or 2-wire control (3-point)

Connecting cable

3 × 0.75 mm², 1 m long

IEC protection class

III (protective extra-low voltage)

Protection level

IP 42

EC conformity

EMC to 2014/30/EU, RoHS to 2011/65/EU

Operating temperature

0 to 50 °C

Weight

0.32 kg


Actuator CM24-F

Supply voltage (AC)

24 V AC ± 20 %, 50/60 Hz

Supply voltage (DC)

24 V DC ± 20 %

Power rating (AC)

1 VA max.

Power rating (DC)

0.5 W max.

Torque

2 Nm

Running time for 90°

75 s

Control input signal

1-wire control or 2-wire control (3-point)

Connecting cable

3 × 0.75 mm², 1 m long

IEC protection class

III (protective extra-low voltage)

Protection level

IP 54

EC conformity

EMC to 2014/30/EU, RoHS to 2011/65/EU

Operating temperature

–30 to 50 °C

Weight

0.185 kg


Actuator 224-230-03-002

Supply voltage

230 V AC, 50/60 Hz

Power rating

4.5 VA

Torque

2.5 Nm

Running time for 90°

20 – 60 s

Control input signal

1-wire control or 2-wire control (3-point)

Connecting cable

3 × 0.75 mm², 1 m long

IEC protection class

II (protective insulation)

Protection level

IP 42

EC conformity

EMC to 2014/30/EU, low voltage to 2014/35/EU, RoHS to 2011/65/EU

Operating temperature

0 to 50 °C

Weight

0.32 kg


Actuator CM230-F

Supply voltage

100 to 240 V AC –15 % +10 %, 50/60 Hz

Power rating

3 VA

Torque

2 Nm

Running time for 90°

75 s

Control input signal

1-wire control or 2-wire control (3-point)

Connecting cable

3 × 0.75 mm², 1 m long

IEC protection class

II (protective insulation)

Protection level

IP 54

EC conformity

EMC to 2014/30/EU, low voltage to 2014/35/EU, RoHS to 2011/65/EU

Operating temperature

–30 to 50 °C

Weight

0.185 kg


Variants

  • Variants

Any attachments are to be defined with the order code of the CAV controller.

B5*

Application

  • Actuator LM24A-F for the min/max switching of volume flow setpoint values of mechanical self-powered volume flow controllers Type RN or EN (only up to a height of 300 mm)

Variants

  • B52: with auxiliary switch for capturing the end positions

Parts and characteristics

  • Supply voltage 24 V AC/DC
  • 1-wire control or 2-wire control (3-point)
  • Mechanical stops for setting the volume flow rate setpoints
  • Switch for setting the direction of rotation
  • Positive lock connection with damper blade shaft
  • Release button to allow for manual operation

Commissioning

  • Set the mechanical stops according to the minimum and maximum volume flow rates
  • Change the direction of rotation if necessary, using the switch, to switch between Vmin andVmax

B6*

Application

  • Actuator LM230A-F for the min/max switching of volume flow setpoint values of mechanical self-powered volume flow controllers Type RN or EN (only up to a height of 300 mm)

Variants

  • B62: with auxiliary switch for capturing the end positions

Parts and characteristics

  • Supply voltage 230 V AC
  • 1-wire control or 2-wire control (3-point)
  • Mechanical stops for setting the volume flow rate setpoints
  • Switch for setting the direction of rotation
  • Positive lock connection with damper blade shaft
  • Release button to allow for manual operation

Commissioning

  • Set the mechanical stops according to the minimum and maximum volume flow rates
  • Change the direction of rotation if necessary, using the switch, to switch between Vmin andVmax

B*2

Application

  • Auxiliary switch S2A for capturing damper blade end positions (end positions reached through actuator operation)
  • Volt-free contacts for signalling or activating switch functions
  • Two integral switches, e.g. for damper blade OPEN and damper blade CLOSED
  • Potentiometer for setting any switch point

E01

Application

  • Actuator 224-024-03-001 for min/max switching
  • Min/Max switching between volume flow setpoint values of mechanical self-powered CAV controllers Type VFC
  • Min/Max change of the damper blade positions of flow adjustment dampers Type VFR

Parts and characteristics

  • Supply voltage 24 V AC/DC
  • 1-wire control or 2-wire control (3-point)
  • Potentiometer for setting the volume flow rate setpoints
  • Positive lock connection with damper blade shaft
  • Functional test button: Motor drives first to minimum position, then to maximum position, then returns to the set position
  • Indicator light: Actuator has reached setpoint, actuator in motion, actuator blocked

Commissioning

  • Use the potentiometer to set the minimum or maximum volume flow rate or the damper blade position

M01

Application

  • Actuator CM24-F for min/max switching
  • Min/Max switching between volume flow setpoint values of mechanical self-powered CAV controllers Type VFC
  • Min/Max change of the damper blade positions of flow adjustment dampers Type VFR

Parts and characteristics

  • Supply voltage 24 V AC/DC
  • 1-wire control or 2-wire control (3-point)
  • Mechanical stops for setting the volume flow rates
  • Positive lock connection with damper blade shaft
  • Gear release magnet

Commissioning

  • Set the mechanical stops according to the minimum and maximum volume flow rates or the damper blade position

E02

Application

  • Actuator 224-230-03-002 for min/max switching
  • Min/Max switching between volume flow setpoint values of mechanical self-powered CAV controllers Type VFC
  • Min/Max change of the damper blade positions of flow adjustment dampers Type VFR

Parts and characteristics

  • Supply voltage 230 V AC
  • 1-wire control or 2-wire control (3-point)
  • Potentiometer for setting the volume flow rate setpoints
  • Positive lock connection with damper blade shaft
  • Functional test button: Motor drives first to minimum position, then to maximum position, then returns to the set position
  • Indicator light: Actuator has reached setpoint, actuator in motion, actuator blocked

Commissioning

  • Use the potentiometer to set the minimum or maximum volume flow rate or the damper blade position

M02

Application

  • Actuator CM230-F for min/max switching
  • Min/Max switching between volume flow setpoint values of mechanical self-powered CAV controllers Type VFC
  • Min/Max change of the damper blade positions of flow adjustment dampers Type VFR

Parts and characteristics

  • Supply voltage 230 V AC
  • 1-wire control or 2-wire control (3-point)
  • Mechanical stops for setting the volume flow rate setpoints
  • Positive lock connection with damper blade shaft
  • Gear release magnet

Commissioning

  • Set the mechanical stops according to the minimum and maximum volume flow rates or the damper blade position

Actuators for volume flow controllers Type RN or EN

Order code detail Actuator Auxiliary switch
Order code detail Part number Type Supply voltage Part number Type

B50

M466DT4

LM24A-F

24 V

B52

M466DT4

LM24A-F

24 V

M536AI3

S2A

B60

M466DT5

LM230A-F

230 V

B62

M466DT5

LM230A-F

230 V

M536AI3

S2A


Actuators for volume flow controllers Type VFC and for flow adjustment dampers Type VFR

Order code detail Part number Type Setpoint setting Supply voltage

E01

A00000038358

224-024-03-001

Potentiometer

24 V

M01

M466EP4

CM24-F

Mechanical stops

24 V

E02

A00000038359

224-230-03-002

Potentiometer

230 V

M02

M466EP5

CM230-F

Mechanical stops

230 V


Electrical connection

  • Electrical connection

Downloads

informazioni di prodotto

production {"X-Frame-Options"=>"SAMEORIGIN", "X-XSS-Protection"=>"1; mode=block", "X-Content-Type-Options"=>"nosniff", "X-Download-Options"=>"noopen", "X-Permitted-Cross-Domain-Policies"=>"none", "Referrer-Policy"=>"strict-origin-when-cross-origin", "Strict-Transport-Security"=>"max-age=31536000; includeSubDomains", "Content-Type"=>"text/html; charset=utf-8"}

Condividi pagina

Consiglia questa pagina

Consiglia questa pagina inviando un link via e-mail.

I campi contrassegnati con (*) sono obbligatori.

Condividi pagina

Grazie per la tua condivisione!

La tua segnalazione è stata inviata e dovrebbe arrivare a breve.


Contatti

Siamo qui per te

Specifichi il suo messaggio ed il tipo di richiesta
Tel.: +39 029829741 | Fax: +39 0298297460

Attachment (max. 10MB)

I campi contrassegnati con (*) sono obbligatori.

Contatti

Grazie per il tuo messaggio!

Il tuo messaggio è stato inviato e sarà processato a breve.
Il nostro dipartimento per la gestione delle richieste ti contatterà appena possibile.
Per domande di carattere generale riguardanti i nostri prodotti o servizi, è possibile contattare:
Tel.: +39 029829741 | Fax: +39 029829760

Contatti

Siamo qui per te

Specifichi il suo messaggio ed il tipo di richiesta
Tel.: +39 029829741 | Fax: +39 0298297460

Attachment (max. 10MB)

I campi contrassegnati con (*) sono obbligatori.

Contatti

Grazie per il tuo messaggio!

Il tuo messaggio è stato inviato e sarà processato a breve.
Il nostro dipartimento per la gestione delle richieste ti contatterà appena possibile.
Per domande di carattere generale riguardanti i nostri prodotti o servizi, è possibile contattare:
Tel.: +39 029829741 | Fax: +39 029829760