Type ZL

For high dust concentrations or as a prefilter for fine dust filters

Z-line filters for the separation of coarse and fine dust, used as the first stage in ventilation and air handling units or as prefilters for high-quality filter stages

Filter groups ISO Coarse (coarse dust filter) and ePM10 (fine dust filter)
Large filter area due to folding
Low differential pressures at high volume flow rates
Moisture-resistant, frame made of non-woven fibres
Optional frame made of plastic, galvanized steel, aluminum
Tested to ISO 16890

Z-line filter, construction NWO

Z-line filter, construction NWO

Z-line filter, construction NWO

Z-line filter, construction NWO

Application

Z-line filter type ZL for the separation of coarse and fine dust in ventilation systems
Coarse dust filter: Prefilter in ventilation systems
Fine dust filter: Prefilter or final filter in ventilation systems

Special characteristics

High dust holding capacity at low initial differential pressure
Long filter life
Quick fitting and removal
Low weight and small transport volume
Can be easily and safely disposed of in municipal refuse incineration plants as emissions are low in harmful substances

Nominal sizes

B × H × D [mm]

Construction features

Folded filter media
Moisture-resistant, sturdy filter frame made of nonwoven fabric
Available in various filter classes and sizes, including commercial installation depths and cross-sections

Materials and surfaces

Filter media made of synthetic fibres
Frame made of non-woven fibres
Optional frame made of plastic, galvanized steel, aluminum

Standards and guidelines

Test according to ISO 16890; international standard for general room air distribution; classification of arrestance efficiency based on the measured fractional arrestance efficiency, which is processed into a reporting system for the fine dust arrestance efficiency (ePM)
For coarse dust filters, the gravimetric separation is measured with synthetic dust
The filters are classified into filter group ISO Coarse depending on the tested values
For fine dust filters, the fractional arrestance efficiency of a certain size range is determined by aerosols (DEHS and KCl)
The filters are classified into filter groups ISO ePM10, ISO ePM2.5 and ISO ePM1 depending on the tested values

Nominal sizes

B × H × D [mm]

Technical information

TECHNICAL DATA, SPECIFICATION TEXT, ORDER CODE, Related products

Gravimetrischer Abscheidegrad Coarse [%] nach ISO 16890	90	–
Fraktionsabscheidegrad ePM10 [%] nach ISO 16890	–	50
Nenn-Anströmgeschwindigkeit [m/s]	2,5	2,5
Anfangs-Druckdifferenz [Pa] bei Nenn-Volumenstrom für T = 47 mm	50	90
Anfangs-Druckdifferenz [Pa] bei Nenn-Volumenstrom für T = 92 mm	35	70
Maximale Betriebstemperatur [°C]	80	80
Maximale relative Feuchte [%]	100	100

Z-line filters type ZL for the separation of coarse dust when used as prefilters, and for the separation of fine dust when used as prefilters or final filters in ventilation systems. Available in various filter classes and sizes, including common installation depths and cross-sections, filter groups ISO Coarse and ISO ePM10 according to ISO 16890. Filter media is folded; this increases the dust holding capacity and extends the filter life.

Special characteristics

High dust holding capacity at low initial differential pressure
Long filter life
Quick fitting and removal
Low weight and small transport volume
Can be easily and safely disposed of in municipal refuse incineration plants as emissions are low in harmful substances

Materials and surfaces

Filter media made of synthetic fibres
Frame made of non-woven fibres
Optional frame made of plastic, galvanized steel, aluminum

Construction

NWO: Frame made of non-woven fibres
PLA: Frame made of plastic
PLAF: Frame made of plastic with 25 mm flange
GAL: Frame made of galvanised steel
ALU: Frame made of aluminium

Sizing data

Filter group [ISO 16890]
Efficiency [%]
Volume flow rate [m³/h]
Initial differential pressure [Pa]
Nominal size [mm]

ZL	–	Coarse	–	90%	–	PLA	/	592 × 592 × 48
\|		\|		\|		\|		\|
1		2		3		4		5

1 Type
ZL Z-line filters

2 Classification
Coarse Gravimetric efficiency according to ISO 16890
ePM10 Fractional efficiency ePM10 to ISO 16890

3 Efficiency [%]
to ISO 16890

4 Construction
NWO Frame made of non-woven fibres
PLA Frame made of plastic
PLAF Frame made of plastic with 25 mm flange
GAL Frame made of galvanised steel
ALU Frame made of aluminium

5 Nominal size [mm]
B × H × D

Dimensions

Dimensional drawing of ZL, 47 mm

				②		③	④	⑤
B [mm]	H	D	Filter class	qv [l/s]	qv [m³/h]	ΔpA [Pa]	m²	Weight
394	495	47	Coarse 90 %	488	1755	50	0,7	0,5
495	495	47	Coarse 90 %	613	2205	50	0,9	0,6
287	592	47	Coarse 90 %	432	1555	50	0,7	0,4
592	592	47	Coarse 90 %	885	3185	50	1,4	0,8
394	622	47	Coarse 90 %	613	2205	50	0,9	0,6
495	622	47	Coarse 90 %	769	2770	50	1,2	0,7
394	495	92	Coarse 90 %	488	1755	35	1,5	0,9
495	495	92	Coarse 90 %	613	2205	35	1,9	1,1
287	592	92	Coarse 90 %	432	1555	35	1,3	0,8
592	592	92	Coarse 90 %	885	3185	35	2,7	1,5
394	622	92	Coarse 90 %	613	2205	35	1,9	1,1
495	622	92	Coarse 90 %	769	2770	35	2,4	1,3
394	495	47	ePM10 70 %	488	1755	90	0,7	0,5
495	495	47	ePM10 70 %	613	2205	90	0,9	0,6
287	592	47	ePM10 70%	432	1555	90	0,7	0,4
592	592	47	ePM10 70 %	885	3185	90	1,4	0,8
394	622	47	ePM10 70 %	613	2205	90	0,9	0,6
495	622	47	ePM10 70 %	769	2770	90	1,2	0,7
394	495	92	ePM10 70 %	488	1755	70	1,5	0,9
495	495	92	ePM10 70 %	613	2205	70	1,9	1,1
287	592	92	ePM10 70 %	432	1555	70	1,3	0,8
592	592	92	ePM10 70 %	885	3185	70	2,7	1,5
394	622	92	ePM10 70 %	613	2205	70	1,9	1,1
495	622	92	ePM10 70 %	769	2270	70	2,4	1,3
			① Nominal size ② Nominal volume flow rate ③ Initial differential pressure ④ Filter area ⑤ Weight

Downloads

informazioni di prodotto

Stampa pagina Type ZL

TROX Services

Productsearch A-Z Find out quickly and simply.

TROX Easy Product Finder Fast. Affidabile. Innovativo.

Tour de Competence Competence - exciting staged.