KVS- Regolatore di portata

layer

RN-Ex

Circular, mechanical self-powered volume flow controllers for the control of supply air or extract air in constant air volume systems, approved and certified for potentially explosive atmospheres (ATEX)

  • ATEX-compliant construction
  • Approved for gases, mists, vapours and dusts in zones 1, 2, 21 and 22
  • Volume flow rate can be set using an external scale, no tools required
  • No on-site test measurements required for commissioning
  • Suitable for airflow velocities of up to 12 m/s
  • Any installation orientation
  • Casing air leakage to EN 1751, class C


Optional equipment and accessories

  • Acoustic cladding for the reduction of case-radiated noise
  • Secondary silencer Type CA for the reduction of air-regenerated noise

per saperne di più

layer

VFL

Circular, mechanical self-powered controllers for insertion into ducting, for the quick and easy balancing of constant volume flow rates in ventilation and air conditioning systems

  • Unique damper blade edge for acoustic optimisation
  • Simple and quick commissioning on site
  • Range of volume flow rate setpoints for each nominal size
  • Precise and simple setting of volume flow rates using a scale
  • Best accuracy among controllers for insertion
  • Suitable for low airflow velocities from 0.8 m/s
  • Any installation orientation; maintenance-free

per saperne di più

layer

EN-Ex

Rectangular, mechanical self-powered volume flow controllers for the control of supply air or extract air in constant air volume systems, approved and certified for potentially explosive atmospheres (ATEX)

  • ATEX-compliant construction
  • Approved for gases, mists, vapours and dusts in zones 1, 2, 21 and 22
  • Suitable for volume flow rates up to 12,096 m³/h or 3,360 l/s
  • Volume flow rate can be set using an external scale, no tools required
  • High control accuracy
  • No on-site test measurements required for commissioning
  • Suitable for airflow velocities up to 8 m/s
  • Casing air leakage to EN 1751, up to class C


Optional equipment and accessories

  • Acoustic cladding for the reduction of case-radiated noise
  • Secondary silencer Type TX for the reduction of air-regenerated noise

per saperne di più

layer

VFC

Circular mechanical self-powered volume flow controllers for the control of supply air or extract air in constant air volume systems with low airflow velocities

  • Suitable for airflow velocities from 0.8 m/s
  • Very simple commissioning
  • Volume flow rate can be set using a rotary knob and a scale on the outside of the casing
  • Simple retrofit of an actuator for variable volume flows
  • Any installation orientation; maintenance-free
  • Casing air leakage to EN 1751, class C


Optional equipment and accessories

  • Secondary silencer Type CA, CS or CF for the reduction of air-regenerated noise
  • Hot water heat exchanger Type WL and electric air heater Type EL for reheating the airflow
  • Actuator for variable volume flows or for Vmin / Vmax switching

per saperne di più

layer

RN

Circular self-powered volume flow controllers for the control of supply air or extract air in constant air volume systems

  • Volume flow rate can be set using an external scale, no tools required
  • High control accuracy
  • No on-site test measurements required for commissioning
  • Suitable for airflow velocities of up to 12 m/s
  • Any installation orientation; maintenance-free
  • Casing air leakage to EN 1751, class C


Optional equipment and accessories

  • Acoustic cladding for the reduction of case-radiated noise
  • Secondary silencer Type CA, CS or CF for the reduction of air-regenerated noise
  • Hot water heat exchanger Type WL and electric air heater Type EL for reheating the airflow
  • Actuator for switching between setpoint values

per saperne di più

layer

EN

Rectangular self-powered volume flow controllers for the control of supply air or extract air in constant air volume systems

  • Suitable for volume flow rates up to 12,096 m³/h or 3,360 l/s
  • Volume flow rate can be set using an external scale, no tools required
  • High control accuracy
  • No on-site test measurements required for commissioning
  • Suitable for airflow velocities of up to 8 m/s
  • Casing air leakage to EN 1751, up to class C


Optional equipment and accessories

  • Acoustic cladding for the reduction of case-radiated noise
  • Secondary silencer Type TX for the reduction of air-regenerated noise
  • Hot water heat exchanger of Type WT for reheating the airflow
  • Actuator for switching between setpoint values

per saperne di più

Condividi pagina

Consiglia questa pagina

Consiglia questa pagina inviando un link via e-mail.

I campi contrassegnati con (*) sono obbligatori.

Condividi pagina

Grazie per la tua condivisione!

La tua segnalazione è stata inviata e dovrebbe arrivare a breve.


Contatti

Siamo qui per te

Visual contact Visual contact

Specifichi il suo messaggio ed il tipo di richiesta
Tel.: +39 029829741 | Fax: +39 0298297460

I campi contrassegnati con (*) sono obbligatori.

Contatti

Grazie per il tuo messaggio!

Visual contact Visual contact

Il tuo messaggio è stato inviato e sarà processato a breve.
Il nostro dipartimento per la gestione delle richieste ti contatterà appena possibile.
Per domande di carattere generale riguardanti i nostri prodotti o servizi, è possibile contattare:
Tel.: +39 029829741 | Fax: +39 029829760

Contatti

Siamo qui per te

Visual contact Visual contact

Specifichi il suo messaggio ed il tipo di richiesta
Tel.: +39 029829741 | Fax: +39 0298297460

Attachment (max. 10MB)

I campi contrassegnati con (*) sono obbligatori.

Contatti

Grazie per il tuo messaggio!

Visual contact Visual contact

Il tuo messaggio è stato inviato e sarà processato a breve.
Il nostro dipartimento per la gestione delle richieste ti contatterà appena possibile.
Per domande di carattere generale riguardanti i nostri prodotti o servizi, è possibile contattare:
Tel.: +39 029829741 | Fax: +39 029829760