TROX AIR PURIFIER

TAP-L with body RAL 9016

TAP-L with body RAL 7012

Prefilter MFI-ePM1 85 %

HEPA filter MFI-H13

Tested to VDI 6022

TROX AIR PURIFIER

TO REDUCE THE RISK OF INFECTION BY AEROSOLS AND VIRUSES IN ENCLOSED SPACES

The TROX AIR PURIFIER filters more than 99.95% of all aerosols out of the air and is the high-performance stand-alone solution for effectively reducing the risk of infection. It operates quietly, efficiently and ensures maximum effectiveness with the highest air change rate in its class of units.

Filters more than 99.95% of aerosols out of indoor air
High air change rates due to volume flow rates through the unit of up to 1600 m³/h
Very quiet operation due to double sound attenuation
Low power consumption with energy-efficient motors
High-efficiency filter system with two filter stages
Maintenance-free, filter exchange after unit message
No specialist personnel required for commissioning
Long service life and efficient operation due to large filter areas
Intelligent air distribution

General information

Application

The TROX air purifier is used to purify atmospheric air indoors. As a stationary air purifier, the unit ensures a relevant reduction in dust and aerosol concentration in the indoor air. By using a HEPA filter H13, it filters 99.95% of all aerosols out of the air and thus effectively reduces the infection risks. The unit is used for purifying the indoor air in heavily frequented rooms. These include, for example:

Waiting and reception areas
Meeting or conference rooms
Schools
Trade fair booths
Dining rooms
Shops

Special characteristics

Compact construction
Easy operation
High operational reliability

Classification

Meets the hygiene requirements

Nominal sizes

Floor-mounted units L (B × H × T 644 × 2313 × 701 mm)
Floor-mounted units M (B × H × T 644 × 2313 × 441 mm)

Construction

SPC: galvanised steel powder-coated

Variants

P1 Surface body powder-coated, colour RAL 7012 20%
P2 Diffuser surface / base frame powder-coated, colour RAL 7021 20%

Parts and characteristics

Fan
Controller for adapting the air change rate
Filter change alert (red light)
Mains isolator with green light luminaire "ready for operation“

Air diffusers

3-sided aligned blades

Useful additions

Mini Pleat filter inserts (MFI) included in delivery
Associated filter inserts as replacement filters must be ordered separately

Construction features

Prefilter stage and HEPA filter stage
Sound attenuator before and after fan

Materials and surfaces

Casing made of powder-coated sheet steel, body RAL 9016 20%, diffuser/base frame RAL 7012 20%

Standards and guidelines

Hygiene meets the requirements of VDI 6022, VDI 3803, DIN 1946 Part 4, ÖNORM H 6021 and ÖNORM H 6020, SWKI VA 104-01 and SWKI 99-3, and EN 13779

Maintenance

Filter changes and other maintenance work can only be carried out when plant operation is interrupted
Air filters can be easily removed and refitted for filter changes

Installation and commissioning

Opening the door with Allen key size 10

Technical information

Function, Technical data, Quick sizing, Order code

The TROX air purifier draws indoor air into the unit at the lower air intake and feeds it to the filters. The prefilter separates coarser particles, then the HEPA filter separates the smallest suspended particles and
particles from the room air. A fan conveys the airflow through the unit and returns the filtered air to the room via the upper outlet. Placed in front of and behind the fan
Sound attenuators reduce the operating noise to a pleasant minimum. With its operation, the TROX air purifier ensures a significant reduction in particles and aerosol concentration in rooms.
By the filtering and high air change rates, the air purifier considerably reduces the amount of germs, viruses and bacteria (depending on the room size) and thus also cuts the risk of infection.

TAP-L Variant

TAP-L with body RAL 9016

Low-noise, even at high air change rates

Volume flow rate	Sound power level of the device	Sound pressure level in the application area	Power consumption
m³/h	dB(A)	dB(A)	W
400	32	24	20
600	40	32	30
800	45	37	55
1000	49	41	95
1200	53	45	150
1400	58	50	225
1600	61	53	310

Low-noise, even at high air change rates

Volume flow rate	Sound power level of the device	Sound pressure level in the application area	Power consumption
m³/h	dB(A)	dB(A)	W
400	38	30	37
500	42	34	56
600	45	37	82
700	48	40	115
800	51	43	155
1000	56	48	256
1200	60	52	386

TAP	–	SPC	–	L	/	P1-RAL…	/	P2-RAL…	/	400 – 1600 [m³/h]
\|		\|		\|		\|		\|		\|
1		2		3		4		5		6

1 TypeTAP TROX AIR PURIFIERS

2 Casing materialSPC galvanised sheet steel, powder-coated

3 Dimensions

L Floor-mounted unit B × H × T 644 × 2313 × 701 mm
M Floor-mounted unit B × H × T 644 × 2313 × 441 mm

4 Body surface
No entry required: powder-coated, colour RAL 9016 20 %

P1 powder-coated, colour RAL 7012 20 %

5 Diffuser surface/base frame
No entry required: powder-coated, colour RAL 7012 20 %
P2 powder-coated, colour RAL 7021 20 %

6 Operating values for factory setting
400 – 1600 m³/h applicable for dimension L

400 – 1200 m³/h applicable for dimension M

TAP-SPC-L/1200

Casing material	galvanised sheet steel, powder-coated
Dimensions	644 × 2313 × 701 mm
Surface (body)	Standard finish 9016-GE20
Colour P1 (body)	RAL 9016
Gloss level (body)	GE 20
Surface (diffuser/base)	Standard finish 7012-GE20
Colour P1 (diffuser/base)	RAL 7012
Gloss level (diffuser/base)	GE 20
Volume flow rate	1200 m³/h

Variants, Product details, Replacement filters

TAP-L Variant

TAP-L with body RAL 9016

Nominal sizes

Floor-mounted unit L (L x W x H 644 × 2313 × 701 mm)
Floor-mounted unit M (L x W x H 644 × 2313 × 441 mm)

Dimensions and space required TAP-L

1 Door opening dimension (hinge left)

2 Fixing brackets (wall distance)

Information about replacement filters can be found on our website a nd in our product data sheet.

Downloads

informazioni di prodotto

Stampa pagina TROX AIR PURIFIER
Product data sheet TROX AIR PURIFIER

TAP_PD_2020_11_24_DE_en Product data sheet 2,1 MB pdf

brochure

Brochure TROX AIR PURIFIER

SB_2020_10_TAP_DE_01_DE_it_web Brochure 1,7 MB pdf

certificati

CAT Certificate - Objective evidence of the cleaning efficiency of the air purifier

TAP_CE_CAT_2020_09_24_DE_en Certificate 9,6 MB pdf
Declaration of hygiene conformity TROX AIR PURIFIER

TAP_HC_2020_10_30_DE_en Certificate 940 KB pdf
TÜV Rheinland Certificate TROX AIR PURIFIER

TAP_CE_TRF_IEC-60335-2-65_2020_10_28_DE_en Certificate 120 KB pdf

manuali d'uso

Manuali d'uso TROX AIR PURIFIER

TAP_OM_V3_A00000083756_2020_10_IT_it Manuali d'uso 3,9 MB pdf

TROX AIR PURIFIER

TO REDUCE THE RISK OF INFECTION BY AEROSOLS AND VIRUSES IN ENCLOSED SPACES

General information

Technical information

Function, Technical data, Quick sizing, Order code

Variants, Product details, Replacement filters

Downloads

informazioni di prodotto

Stampa pagina TROX AIR PURIFIER

Product data sheet TROX AIR PURIFIER

brochure

Brochure TROX AIR PURIFIER

certificati

CAT Certificate - Objective evidence of the cleaning efficiency of the air purifier

Declaration of hygiene conformity TROX AIR PURIFIER

TÜV Rheinland Certificate TROX AIR PURIFIER

manuali d'uso

Manuali d'uso TROX AIR PURIFIER