00142859_0
VSD50-1-LT-AZ-M-L/1175


00177972_0
Installation in lightweight partition walls with metal support structure


00173280_0
Angled one-way air discharge


00142859_0
00177972_0
00173280_0

VSD50-1-LT

For the space saving installation into lightweight partition walls with a metal support structure

Slot diffusers with 50 mm diffuser face (nominal width) and adjustable air control elements

  • Nominal length: 550, 1175 mm, 1 slot
  • Volume flow rate range 10 – 70 l/s or 36 – 252 m³/h
  • Diffuser face made of extruded aluminium sections
  • For variable and constant volume flows
  • Installation into lightweight partition walls with a 50 mm wide metal support structure and a wall thickness of 100 mm
  • High induction results in a rapid reduction of the temperature difference and airflow velocity
  • Individually adjustable air control elements to meet individual local requirements


Optional equipment and accessories

  • Exposed diffuser face available in RAL CLASSIC colours
  • Damper blade for volume flow rate balancing, can be adjusted through the diffuser face

Application

Application

  • Type VSD50-1-LT slot diffusers are used as supply air or extract air devices or as supply and extract air combinations in comfort zones
  • Angled one-way air discharge for turbulent flow (mixed flow ventilation)
  • High induction results in a rapid reduction of the temperature difference and airflow velocity (supply air variant)
  • For variable and constant volume flows
  • For supply air to room air temperature differences from –10 to +10 K
  • For room heights up to 4 m (lower edge of suspended ceiling)
  • For the space saving installation into lightweight partition walls with a 50 mm wide metal support structure and a wall thickness of 100 mm

Special characteristics

  • Individually adjustable air control elements to meet individual local requirements
  • High induction results in a rapid reduction of the temperature difference and airflow velocity
  • Diffuser face has been optimised for maximum volume flow rate at low sound power levels
  • Internal acoustic lining that reduces room-to-room cross talk through the ductwork
  • For easy and safe installation of the diffuser face after drywalling is complete


Nominal sizes

  • LN: 550, 1175 mm

Description

Variants

  • VSD50 -1-LT: Slot diffuser for supply air or extract air
  • VSD50 -1-LT-AZ: Slot diffuser as a supply and extract air combination (only LN 1175 mm)
  • VSD50 -1-LT-.../WW: White air control elements

Parts and characteristics

  • Diffuser face with individually adjustable air control elements
  • Plenum box for horizontal duct connection
  • Internal acoustic lining to increase transmission loss
  • Spring clip fixing

Attachments

  • Damper blade for volume flow rate balancing

Accessories

  • Lip seal

Construction features

  • Spigot suitable for circular ducts to EN 1506 or EN 13180
  • Spigot with groove for lip seal (if accessory lip seal has been ordered)

Materials and surfaces

  • Diffuser face made from extruded aluminium sections
  • Air control elements made of plastic, UL 94, V-0, flame retardant
  • Plenum box made of galvanised sheet steel
  • End angle made of aluminium
  • Lip seal made of rubber
  • Acoustic lining of the cross-talk attenuator is mineral wool
  • Diffuser face with anodised finish, E6-C-0, natural colour
  • P1: Powder-coated, RAL CLASSIC colour
  • Air control elements similar to RAL 9005, black
  • WW: Air control elements similar to RAL 9010, white


Mineral wool

  • To EN 13501, fire rating class A1, non-combustible
  • RAL quality mark RAL-GZ 388
  • Biosoluble and hence hygienically safe according to the German TRGS 905 (Technical Rules for Hazardous Substances) and EU directive 97/69/EC
  • Faced with glass fibre fabric as a protection against abrasion through airflow velocities of up to 20 m/s
  • Inert to fungal and bacterial growth

Standards and guidelines

  • Sound power level of the air-regenerated noise measured according to EN ISO 5135

Maintenance

  • Maintenance-free as construction and materials are not subject to wear
  • Inspection and cleaning to VDI 6022

Downloads

informazioni di prodotto

brochure

certificati

manuali d'uso

production {"X-Frame-Options"=>"SAMEORIGIN", "X-XSS-Protection"=>"1; mode=block", "X-Content-Type-Options"=>"nosniff", "X-Download-Options"=>"noopen", "X-Permitted-Cross-Domain-Policies"=>"none", "Referrer-Policy"=>"strict-origin-when-cross-origin", "Content-Security-Policy"=>"frame-ancestors 'self' https://api.scrivito.com https://punchoutcommerce.com https://www.trox.de https://trox-extern.com https://psp40.onventis.com https://psp22.onventis.com https://trox4u.troxgroup.com", "Strict-Transport-Security"=>"max-age=31536000; includeSubDomains", "Content-Type"=>"text/html; charset=utf-8"}

Condividi pagina

Consiglia questa pagina

Consiglia questa pagina inviando un link via e-mail.

I campi contrassegnati con (*) sono obbligatori.

Condividi pagina

Grazie per la tua condivisione!

La tua segnalazione è stata inviata e dovrebbe arrivare a breve.


Contatti

Siamo qui per te

Specifichi il suo messaggio ed il tipo di richiesta
Tel.: +39 029829741 | Fax: +39 0298297460

I campi contrassegnati con (*) sono obbligatori.

Contatti

Grazie per il tuo messaggio!

Il tuo messaggio è stato inviato e sarà processato a breve.
Il nostro dipartimento per la gestione delle richieste ti contatterà appena possibile.
Per domande di carattere generale riguardanti i nostri prodotti o servizi, è possibile contattare:
Tel.: +39 029829741 | Fax: +39 029829760

Contatti

Siamo qui per te

Specifichi il suo messaggio ed il tipo di richiesta
Tel.: +39 029829741 | Fax: +39 0298297460

Attachment (max. 10MB)

I campi contrassegnati con (*) sono obbligatori.

Contatti

Grazie per il tuo messaggio!

Il tuo messaggio è stato inviato e sarà processato a breve.
Il nostro dipartimento per la gestione delle richieste ti contatterà appena possibile.
Per domande di carattere generale riguardanti i nostri prodotti o servizi, è possibile contattare:
Tel.: +39 029829741 | Fax: +39 029829760