Type VSD15

With slim diffuser face

Slot diffusers with 15 mm diffuser face (nominal width) and adjustable air control elements

  • Nominal lengths from 600 to 1500 mm, 1 slot
  • Volume flow rate range from 7 to 30 (l/s)/m or 25 to 108 (m³/h)/m
  • Diffuser face made of extruded aluminium sections
  • For variable and constant volume flows
  • Suitable for continuous linear arrangement
  • High induction results in a rapid reduction of the temperature difference and airflow velocity
  • Individually adjustable air control elements to meet individual local requirements


Optional equipment and accessories

  • Exposed diffuser face available in RAL CLASSIC colours
  • Diffuser face with extended border
  • Damper blade for volume flow rate balancing, can be adjusted through the diffuser face
  • Plenum box with lining
  • End angle, end seal
  • White air control elements

VSD15-A 00134727_0


  • Application
  • Description

Application

  • Type VSD15 slot diffusers are used as supply air or extract air devices in comfort zones
  • Air discharge is one-way or alternating horizontal, or alternating angled; turbulent flow (mixed flow ventilation)
  • High induction results in a rapid reduction of the temperature difference and airflow velocity (supply air variant)
  • For variable and constant volume flows
  • For supply air to room air temperature differences from –10 to +10 K
  • For room heights up to 4 m (lower edge of suspended ceiling)
  • For suspended ceilings; suitable for restricted ceiling voids due to the low overall height of the plenum box
  • Ideal for suspended panelled ceilings with standard 16 mm gaps
  • Suitable for continuous linear arrangement

Special characteristics

  • Individually adjustable air control elements to meet individual local requirements
  • High induction results in a rapid reduction of the temperature difference and airflow velocity
  • Ideal for suspended panelled ceilings with standard 16 mm gaps
  • Suitable for continuous linear arrangement

Nominal sizes

  • LN: 600, 700, 800, 900, 1000, 1100, 1200, 1300, 1400, 1500 mm
  • Diffuser face available in intermediate sizes from 300 to 2000 mm, in increments of 1 mm

Variants

  • VSD15-F: Diffuser face only
  • VSD15-...: Diffuser face without extended border
  • VSD15-...-Z0: Diffuser face with extended border
  • VSD15-...: Black air control elements
  • VSD15-.../WW: White air control elements


Connection

  • A: Plenum box
  • D: Plenum box with lining

Parts and characteristics

  • Diffuser face with individually adjustable air control elements
  • Plenum box for horizontal duct connection
  • Connecting pins and alignment plates to connect and align slot diffusers for a continuous linear arrangement

Attachments

  • M: Damper blade for volume flow rate balancing
  • A9: End seal (only for diffuser face without extended border)
  • CA: End angle (only for diffuser face with extended border Z0)

Accessories

  • Lip seal

Useful additions

  • ED: Two end seals (only for diffuser face without extended border)
  • EW: Two end angles (only for diffuser face with extended border Z0)
  • To be ordered separately for continuous linear runs

Construction features

  • Spigot suitable for circular ducts to EN 1506 or EN 13180
  • Spigot with groove for lip seal (if accessory lip seal has been ordered)

Materials and surfaces

  • Diffuser face made from extruded aluminium sections
  • Air control elements made of plastic, UL 94, V-0, flame retardant
  • Plenum box made of galvanised sheet steel
  • Lip seal made of rubber
  • Lining is mineral wool
  • Diffuser face without extended border is powder-coated RAL 9005, jet black
  • Diffuser face with extended border is anodised, E6-C-0, natural colour
  • P1: Powder-coated, RAL CLASSIC colour
  • Air control elements similar to RAL 9005, black
  • WW: Air control elements similar to RAL 9010, white


Mineral wool

  • To EN 13501, fire rating class A1, non-combustible
  • RAL quality mark RAL-GZ 388
  • Biosoluble and hence hygienically safe according to the German TRGS 905 (Technical Rules for Hazardous Substances) and EU directive 97/69/EC
  • Faced with glass fibre fabric as a protection against erosion through airflow velocities of up to 20 m/s
  • Inert to fungal and bacterial growth

Standards and guidelines

  • Sound power level of the air-regenerated noise measured according to EN ISO 5135

Maintenance

  • Maintenance-free as construction and materials are not subject to wear
  • Inspection and cleaning to VDI 6022

Condividi pagina

Consiglia questa pagina

Consiglia questa pagina inviando un link via e-mail.

I campi contrassegnati con (*) sono obbligatori.

Condividi pagina

Grazie per la tua condivisione!

La tua segnalazione è stata inviata e dovrebbe arrivare a breve.


Contatti

Siamo qui per te

Visual contact Visual contact

Specifichi il suo messaggio ed il tipo di richiesta
Tel.: +39 029829741 | Fax: +39 0298297460

I campi contrassegnati con (*) sono obbligatori.

Contatti

Grazie per il tuo messaggio!

Visual contact Visual contact

Il tuo messaggio è stato inviato e sarà processato a breve.
Il nostro dipartimento per la gestione delle richieste ti contatterà appena possibile.
Per domande di carattere generale riguardanti i nostri prodotti o servizi, è possibile contattare:
Tel.: +39 029829741 | Fax: +39 029829760

Contatti

Siamo qui per te

Visual contact Visual contact

Specifichi il suo messaggio ed il tipo di richiesta
Tel.: +39 029829741 | Fax: +39 0298297460

Attachment (max. 10MB)

I campi contrassegnati con (*) sono obbligatori.

Contatti

Grazie per il tuo messaggio!

Visual contact Visual contact

Il tuo messaggio è stato inviato e sarà processato a breve.
Il nostro dipartimento per la gestione delle richieste ti contatterà appena possibile.
Per domande di carattere generale riguardanti i nostri prodotti o servizi, è possibile contattare:
Tel.: +39 029829741 | Fax: +39 029829760